3. Check that Client for Microsoft Networks is in the Components
list. If it is not installed, click Install to install it.
4. Run the command prompt and enter the following command.
NET USE printer port: \\NetBIOS name of Internal Print
Server\Device name of Internal Print Server
Selecting the port
1. Click Start, point to Settings, and then select Printers.
2. Right-click the printer icon and then select Properties.
3. Click the Ports tab and then select the port you have set with
the NET USE command.
Windows NT 4.0
For Windows NT 4.0, the printer driver installation procedure
differs depending on the printing method you prefer.
LPR printing
Note:
If you are using EpsonNet Direct Print, the setup procedure is different.
See "About EpsonNet Direct Print" on page 147 for details.
1. Click Start, point to Settings, and then select Printers.
2. Double-click the Add Printers icon.
3. Select the My Computer radio button, and then click Next.
4. Click Add Port in the Add Printer wizard dialog box.
94
Installing the Printer Driver