NetBEUI
IPP
SNMP
Configuration - Optional
Administrator
Reset
Password
Information - Printer Screens
This section explains about the Device and Consumable
information screens. See "Configuration - Printer screens" on
page 183 about input, print, emulation, and interface information.
Device information
Items
Panel canvas
Signal
LEDs
Configure the desired settings for NetBEUI.
Configure the desired settings for IPP.
Configure the desired settings for SNMP.
Type the name of the administrator and a link to a
favorite Web site.
Resets the printer and returns to the default settings.
Set the password to protect settings.
Explanations
Displays the same information that is displayed
on the printer's control panel.
A signal shows the status level. The green light
is on when the printer is idle or printing. The
yellow light is on when the toner or oil roll is low.
The red light is on when the printer is out of paper
or toner, if paper is jammed, the cover is open, or
an error has occurred.
The LEDs indicates the current operating printer
status when you first turn on the printer, during
normal operation, and when errors occur.
EpsonNet WebAssist
11
11
11
11
11
11
11
11
11
11
11
11
181