Windows 2000 - Epson AcuLaser C8600 Administrator's Manual

5. If the necessary components are not in the list, click Install to
install them, as described below.
For LPR or Internet printing:
Internet Protocol (TCP/IP) is installed by default. You cannot
add or delete it.
For Microsoft Network Shared printing:
Select Client and then click Add. Select Client for Microsoft
Networks and then click OK.
For printing via NetWare server:
Select Service and then click Add. Select Service Advertising
Protocol and then click OK. NWLink IPX/SPX/NetBIOS
Compatible Transport Protocol is installed.
Select Client and then click Add. Select Client Service for
NetWare and then click OK.
6. For LPR, Internet, Microsoft Network Shared printing:
Double-click Internet Protocol (TCP/IP) on the Local Area
Connection Properties dialog box to open the Internet
Protocols (TCP/IP) Properties dialog box. Set the IP address,
the subnet mask, etc. and then click OK.
7. Restart the computer.
The necessary components are now installed. Go to "About
EpsonNet WinAssist" on page 41.

Windows 2000

For Windows 2000, use the following procedure to install the
necessary components.
Note:
The Windows 2000 CD-ROM may be required during the
installation.
32 Installing Components on Your Computer