About Passwords - Epson AcuLaser C8600 Administrator's Manual

Network Number Set:
Select either Auto or Manual. Auto is usually preferred.
Network Number for Manual Mode:
Type a value between 0 and 65534 when Manual is selected
for Network Number Set.
7. After making settings, click Send. The Password dialog box
appears.
8. Enter your password (up to 20 characters) and click OK to save
settings. If you are entering a password for the first time, click
Change and set the password. For more information about
passwords, see "About passwords" on page 73.
After updating is complete, refresh the configuration. To do
this, quit and restart EpsonNet MacAssist.
c

About passwords

The password is required to configure the Internal Print Server.
When you click OK in the setting dialog box or click Return to
default, the Password dialog box appears.
1. To set the password or to change the current password, click
Change.
2. In the Administrator password dialog box, enter a password
(up to 20 characters) and click OK. Passwords are case
sensitive.
Caution:
Since it takes 2 or 3 minutes to send new settings to the
Internal Print Server, wait until an on-screen message
appears to indicates that you can turn off your printer.
EpsonNet MacAssist Configuration Utility
5
5
5
5
5
5
5
5
5
5
5
5
73