Fuser Unit
Waste Toner Corrector
Configuration - Printer screens
This section explains about printer information. With EpsonNet
WebAssist, you can make some of the same printer settings that
you can set using the printer's control panel. See the Reference
Guide for more information on each item.
Note:
A password is required when you click items under Printer on the
Configuration menu.
Input information
Items
MP Mode
MP Tray Paper Size
LC1 Paper Size
LC2 and LC3 Paper Size
MP Tray Paper Type
LC1 Paper Type
The amount of fuser unit remaining. This item
appears only if your printer supports this function.
The amount of waste remaining. This item
appears only if your printer supports this function.
Explanations
Select the priority order of paper feeding from MP
Tray.
Select the paper size for MP Tray.
Displays the currently loaded paper size in the
lower paper cassette.
If the optional Large Capacity Paper Unit is
installed, the currently loaded paper size in each
cassette of Large Capacity Paper Unit is
displayed.
Select the paper type for MP Tray.
Select the paper type for the lower paper
cassette.
EpsonNet WebAssist
11
11
11
11
11
11
11
11
11
11
11
11
183