Netware - Epson AcuLaser C8600 Administrator's Manual

Items
Get IP address
Set by PING
IP address
Subnet mask
Default gateway
Use a private IP address
when an IP address
cannot be assigned by
the DHCP server
Universal Plug and Play
Universal Plug and Play
device name

NetWare

To use the printer in the NetWare environment, configure the
Internal Print Server on this screen. You can configure the Internal
Print Server either in Print Server mode or Remote Printer mode.
Note:
Log in to the NetWare server or the NDS context with supervisor
privileges.
If the current login environment is different from the current
configuration of the Internal Print Server, a message appears when
you run EpsonNet WinAssist. If you do not want to change the
current Internal Print Server configuration, click Cancel and log
in to the NetWare server or the NDS context with the same mode
set to the Internal Print Server again.
Explanations
Select a method for acquiring IP addresses.
Enables or disables IP address setting using the ping
command.
Enter an IP address for the Internal Print Server. Be
sure that the IP address is unique and does not
conflict with any other device on the network.
Enter the subnet mask of the IP address.
Enter the gateway address.
Select this check box to assign an private IP address
automatically without using the DHCP server on your
network.
Enables or disables the Universal Plug and Play.
Enter the device name for the Universal Plug and
Play.
EpsonNet WinAssist Configuration Utility
4
4
4
4
4
4
4
4
4
4
4
4
51