About The [Start] Key, The [Stop] Key, And The [Interrupt] Key; The [Start] Key; The [Stop] Key; The [Interrupt] Key - Oce VarioLink 4522c User Manual

4.1

About the [Start] key, the [Stop] key, and the [Interrupt] key

4.1 About the [Start] key, the [Stop] key, and the [Interrupt] key

The [Start] key

%
Start the copy, scan or fax operation.
Press this key again to restart a suspended job.
% When this machine is ready to begin the operation, the indicator on the [Start] key lights up in blue.
If the indicator on the [Start] key lights up in orange, the copy operation cannot begin. (Check that
no warning or message is displayed in the touch panel.)

The [Stop] key

%
Press the [Stop] key while copying to temporarily stop the scanning or printing operation.
% To resume a temporarily stopped job, press the [Start] key.
% To delete a temporarily stopped job, select a job in the suspended job list in the screen, and press
the [Delete] key.

The [Interrupt] key

Press this key to start a new copy job with different copy settings by suspending the current job in process.
This is convenient when you need to make copies urgently.
0 The [Interrupt] key cannot be operated while an original is being scanned.
0 Pressing the [Interrupt] key restores the default settings.
1
Load the original.
2
Press the [Interrupt] key.
The indicator on the Interrupt key lights up in green and printing of the current job is suspended.
3
Configure the copy settings.
4
Press the [Start] key.
5
After the interrupting job has finished printing, press the [Interrupt] key.
The Interrupt indicator goes off and the interrupting copy settings are canceled.
The copy settings return to those specified before the interrupting copying job.

The [Reset] key

Resets all settings (except programmed settings) entered using the control panel or touch panel.
%
Press the [Reset] key.
The basic settings screen appears.
VL6522c/VL5522c/VL4522c
4
4-5