Registering A User Using Data Administrator - Oce VarioLink 4522c User Manual

11.1 Using authentication unit (IC card type)
5
Press [Edit].
6
Place the IC card on the authentication unit, and press [OK].
7
When message [Registration complete] appears, press [Close] twice.
8
Enter the user name and password.
9
Configure function permission settings as required.
10
Press [OK].
11
Press [Close].

Registering a user using Data Administrator

To use Data Administrator, configure this machine, and set up Data Administrator. For setup, install the IC
Card Driver (USB-Driver) of the authentication unit, and then install Data Administrator IC Card Plugin.
NOTICE
Before setup, install Data Administrator V4.0 or later in your computer. For the Data Administrator operating
environment and installation procedure, refer to the Data Administrator User's Guide.
VL6522c/VL5522c/VL4522c
11
11-7