1St Z-Fold Position Adjustment; 2Nd Z-Fold Position Adjustment - Oce VarioLink 4522c User Manual

7.1 System Settings

1st Z-Fold Position Adjustment

Adjust the first paper folding position for each paper size when using the Z-fold function.
0 Before making any adjustments, create a sample using the Z-fold function. Adjust the center staple
position while checking the created sample.
0 This adjustment is available if the Z Folding Unit is installed.
1
Select [Utility/Counter] ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö
[Finisher Adjustment] ö [1st Z-Fold Position Adjustment].
2
While checking the sample, press [+] or [-] to adjust the first folding position.
3
Press [OK].
4
Create a sample, and check the print result.

2nd Z-Fold Position Adjustment

Adjust the second paper folding position for each paper size when using the Z-fold function.
0 Before making any adjustments, create a sample using the Z-fold function. Adjust the center staple
position while checking the created sample.
0 This adjustment is available if the Z Folding Unit is installed.
VL6522c/VL5522c/VL4522c
1st Z-Fold Position
2nd Z-Fold Position
7
7-21