Using The Machine During Non-Scheduled Hours - Oce VarioLink 4522c User Manual

4.5 The [Access] key

Using the machine during non-scheduled hours

The machine can be set to automatically enter Sleep mode according to a usage schedule determined by the
administrator so the use of the machine can be limited. This is referred to as Weekly Timer. Follow the
procedure described below to use the machine while the Weekly Timer is being used.
0 From the [Password for Non-Business Hours] screen (displayed from Administrator Settings mode), the
machine can be set so that the screen for entering the password for non-business hours is not
displayed.
1
Press the [Power Save] key.
2
Enter the password for non-business hours.
3
Press [OK].
4
Using the keypad, enter the length of time to elapse before the machine enters Sleep mode again.
5
Press [OK].
The basic settings screen appears.
d
Reference
To configure Weekly Timer:
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Weekly Timer Settings].
VL6522c/VL5522c/VL4522c
4
4-11