Oce VarioLink 4522c User Manual page 89

5
Settings
Offset Yes/No
Fold/Bind
Staple
Punch
5-12
Specify whether to separate each set of copies from another set in the output
tray when copying multiple sets of multi-page originals.
If no finisher is installed:
If the following conditions are met, printed copies are fed out and sorted in an
alternating crisscross pattern.
• A4, B5, or 8.5 e 11 paper is used
• Paper of the same size and type is loaded with the w orientation in one pa-
per tray and with the v orientation in another tray
• Auto paper selection is specified for the paper size setting
If a finisher is installed:
The copies are fed out and stacked on top of each other with each set shifted
to separate it.
When the Saddle Stitcher SD-508 is installed on the Finisher FS-526:
Half Fold
Z Fold
To configure the Z folding setting, install the Z Folding Unit ZU-606.
When the Saddle Stitcher SD-509 is installed on the Finisher FS-527:
Half Fold
Staples copies in corner or at two points before they are output.
Punches holes in copies before they are output.
1
Center Staple & Fold
Center Staple & Fold
VL6522c/VL5522c/VL4522c
Basic 5.1
Tri-Fold