Oce VarioLink 4522c User Manual page 169

7
Factory default
Half-Fold Position
Tri-Fold Position Adjust-
ment
Punch Vertical Position Ad-
justment
Punch Horizontal Position
Adjustment
Punch Regist Loop Size
Adjustment
Vertical Punch (Z-Fold) Po-
sition Adjustment
Horizontal Punch (Z-Fold)
Position Adjustment
1st Z-Fold Position Adjust-
ment
2nd Z-Fold Position Ad-
justment
Post Inserter Tray Size Ad-
justment
Density Adjustment
Image Stabilization Only
Image Stabilization Setting
Paper Separation Adjust-
ment
Color Registration Adjust
Prior Detection Setting
Feed Cleaning Settings
Non-Image Area Erase Op-
eration Settings
7-14
0.0 mm
0.0 mm
0.0 mm
0.0 mm
For Finisher FS-526
Finisher: 0.0 mm
Finisher (for Z folding): 0.0 mm
Post inserter feeder (Upper tray): 0.0 mm
Post inserter feeder (Lower tray): 0.0 mm
For Finisher FS-527: 0
0.0 mm
0.0 mm
0.0 mm
0.0 mm
Auto Detect
0
Image Stabilization Only
Standard
0.0 mm
0 dot
Yes
Warning Display: TYPE2
Detection Level: Std.
Remove
Auto
System Settings 7.1
VL6522c/VL5522c/VL4522c