Non-Image Area Erase - Oce VarioLink 4522c User Manual

5.4 Application

Non-Image Area Erase

This function enables copying with the ADF open while having an original that cannot be loaded in the ADF
placed at a desired position on the original glass.
The original is automatically detected and the area outside the original text is erased.
Erase methods include "Bevel" and "Rectangular". "Bevel" is used when the background of the original is
thin and "Rectangular" is used when it is dark.
You can place the original on any position without opening or closing the ADF so that you can make copies
promptly. In addition, toner consumption will be reduced as the area outside the original text is erased.
0 If erasing is not performed as desired, set "Erase Operation" under "Erase Adjustment" in Administrator
Settings.
0 The size of the original automatically detected is 10 mm e 10 mm or larger.
If the detection fails, a blank sheet of paper is output.
0 You cannot make copies with the ADF closed.
0 The original image may be defected at its top or end.
%
Press [Application] ö [Erase] ö [Non-Image Area Erase].
d
Reference
To set Erase Operation:
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö
[Erase Adjustment].
VL6522c/VL5522c/VL4522c
Rectangular erasing
Bevel erasing
5
5-43