The [Power Save] Key - Oce VarioLink 4522c User Manual

4
4.6

The [Power Save] key

If no operation is performed for a specified length of time, the touch panel goes off and the machine
automatically enters a mode where it conserves energy. This is referred to as Low Power or Sleep mode.
The following describes the procedure for returning from Low Power or Sleep mode.
0 Although the machine conserves more energy in Sleep mode than in Low Power mode, the warm-up
process for returning to ready-for-copy state from Sleep mode is more time-consuming.
0 As the factory default, Low Power mode is set to restart after 15 minutes and Sleep mode after 30
minutes. In other words, the machine enters Low Power mode if no operation is performed for 15
minutes. Likewise, it enters Sleep mode after 30 minutes has elapsed.
0 The machine can receive jobs even while it is in Low Power mode.
%
Press the [Power Save] key.
The machine returns from Low Power mode when any other key on the control panel or the touch panel
surface is pressed.
d
Reference
To enable Low Power mode:
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Power Save Settings].
4-12
The [Power Save] key
VL6522c/VL5522c/VL4522c
4.6