Mac Filter; Chapter 20 Mac Filter; Mac Filter Overview - ZyXEL Communications AX Series User Manual

Hide thumbs Also See for AX Series:

Table of Contents

You can configure the Zyxel Device to permit access to clients based on their MAC addresses in the

MAC Filter screen. This applies to wired and wireless connections. Every Ethernet device has a unique

MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six

pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC addresses

of WiFi or wired LAN client to configure this screen.

20.2 MAC Filter

Enable MAC Address Filter and add the host name and MAC address of a WiFi or wired LAN client to the

table if you wish to allow or deny them access to your network. You can choose to enable or disable the

filters per entry; make sure that the check box under Active is selected if you want to use a filter. Select

Security > MAC Filter. The screen appears as shown.

Figure 194 Security > MAC Filter

AX/DX/EX/PX Series User's Guide