Agilent Technologies 34972A User Manual page 177

SCPI Commands
This section concentrates on the features available from the front panel;
you can also control the mass memory subsystem with the following
SCPI commands:
• MMEMory:FORMat:READing:CSEParator <column_separator>
• MMEMory:FORMat:READing:CSEParator?
• MMEMory:FORMat:READing:RLIMit <row_limit>
• MMEMory:FORMat:READing:RLIMit?
• MMEMory:LOG[:ENABle] <state>
• MMEMory:LOG[:ENABle]?
• MMEMory:EXPort?
• MMEMory:IMPort:CONFiguration? "<configuration_file>"
• MMEMory:IMPort:CATalog?
For more information on the SCPI commands available to program the
instrument over the remote interface, see the MMEMory commands in
the Agilent 34970A/34972A Programmer's Reference Help.
Folder and File Structure
Folder Description
Each saved scan will be stored in a top-level folder named:
/34972A/data/[instrument_SN]/[yyyymmdd_hhmmssmmm]
The square brackets ( [ ] ) are not actually part of the directory name,
and the yyyymmdd_hhmmssmmm is a timestamp indicating the
approximate start of the scan. The format is year (yyyy), month (mm),
day (dd), underscore (_), hours (hh), minutes (mm), seconds (ss), and
milliseconds (mmm).
Chapter 4 Features and Functions
Mass Memory (USB) Subsystem - 34972A
4
177