Hitachi SelecSet 400A User Manual page 98

C 2: A
HAPTER DDITIONAL
Assigning
account codes
to autodial
keys
Assigning an
account code
using the
keypad
HCXTD830, Rev. A01, July 2001
O
PERATIONS
Each autodial key must be programmed with the
appropriate feature access code (either fixed or variable)
followed by the account code. If using a variable account
code, be sure to include a # sign at the end of the code. See
"Programming Instructions"
autodial keys.
At the beginning of a call...
1
Dial the appropriate feature access code followed by
the account code.
2
Wait for dial tone.
3
Dial the desired number. Remember to include the
trunk access code (usually 9) for outside calls.
During a call...
1
During a call, ask the party to hold.
2
Press <JOIN>.
3
Dial the desired access code (either fixed or variable).
4
Dial the account code. If using a variable account
code, be sure to dial the # sign at the end of the
account code.
5
Wait for confirmation tone.
6
Press the flashing CAP to retrieve the call.
A A
SSIGNING CCOUNT
on page A-2 to program
C
ODES
2-35