Creating A Multiparty Conference - Hitachi SelecSet 400A User Manual

C 1: A
HAPTER BOUT

Creating a Multiparty Conference

Procedure
HCXTD830, Rev. A01, July 2001
Y S S 400A
OUR ELEC ET
To set up a multiparty conference:
1
While connected to one party, press <CONF>. Dial a
second party.
2
After the called party answers, press <CONF> to
create a three-party conference.
3
To add an additional party, press <CONF> and dial
the desired number. The two other parties are
automatically placed on hold.
4
If you misdial, press <CNCL>. This returns you to the
three-party conference. You can then redial the new
party.
5
To announce the conference to the new party, wait
until the called party answers and then press <CONF>
to connect all parties. Or, you can connect all parties
immediately by pressing <CONF> as soon as the
called party picks up.
Once the conference is formed, the display updates
with the new number of conferees.
6
Repeat these steps to add additional conferees. You
can have a total of six people in a conference.
7
Press <HOLD> to place the conference on hold.
A conference can only be held by pressing the
<HOLD> key. Soft park and hold loops cannot be
used to hold a conference.
8
Press <START>, then the winking CAP representing
the held conference to retrieve the conference.
C M
REATING A ULTIPARTY
C
ONFERENCE
1-43