Hitachi SelecSet 400A User Manual page 129

P
AGING
Procedure,
continued
Zone paging
with park
procedure
2-66
3
Announce instructions for the desired party to
respond to your page.
4
Remain on the line to be automatically connected to
the paged party.
5
To answer a zone page with auto meet-me, the user
should dial the zone paging answer code.
6
The user is connected to the paging party
immediately.
To use zone paging with park:
1
Press the <ZPG/P> (zone paging with park) key or
dial the zone paging with park access code while
connected to the caller.
2
Dial the proper zone number.
3
Dial a parked call identifier (PCI). When the PCI is
dialed, you can do one of two things:
- Press <START> to complete the park, or
- Press <CONF> to create a three-way conference
when the paged party responds.
Note: A PCI is a number used to identify the parked
call. Contact your system administrator for a list
of the PCIs available in your system, or, use your
own station number or the station number of the
paged party as a PCI. Parked call identifiers
(PCIs) are sometimes referred to as beeper
identification numbers (BIDs).
4
To answer a zone page with park, the user dials the
call park retrieve access code, plus the parked call
identifier (PCI) used to park the call and is instantly
connected to the parked call.
S S 400A U
ELEC ET
HCXTD830, Rev. A01, July 2001
G
SER UIDE