Saved Number Redial (Snr) - Hitachi SelecSet 400A User Manual

C 2: A
HAPTER DDITIONAL

Saved Number Redial (SNR)

About SNR
Procedure
Summary
HCXTD830, Rev. A01, July 2001
O
PERATIONS
Use saved number redial to save your most recently dialed
number and cause the last number redial function to ignore
any new numbers that you dial.
To used saved number redial, follow these steps:
To save the number you just dialed...
1
Press the <SNR> key. The <SNR> key lights. You
can press the <SNR> key as soon as the number is
dialed, or you can wait until you hang up before
pressing the key.
To dial the saved number...
2
Press the <LNR> key.
To cancel the saved number and activate LNR...
3
Press the <SNR> key again.
Refer to the following table for a summary of how to use
last number redial and saved number redial.
To use LNR
Press <LNR>. 1 Press <SNR> (SNR lamp on).
S
AVED
To use SNR
2 Press <LNR> to dial SNR number.
3 Press <SNR> to cancel (SNR lamp off)
N R
UMBER EDIAL
(SNR)
2-71