Fixed Keys; Table 1-3 Selecset 400A Fixed Keys - Hitachi SelecSet 400A User Manual

F K
IXED EYS

Fixed Keys

About fixed
keys
Key
<DSPL>
<SWAP>
<JOIN>
<CONF>
<HOLD>
<CNCL>
<START>
<ANS>
1-18
Fixed keys are the first two rows of keys directly above
the keypad (<DSPL>, <SWAP>, <JOIN>, and <CONF>)
plus the single row of keys to the left of the keypad (four
CAPs and the <ANS> and <START> keys. Fixed keys
perform important, frequently used functions. Their
location and purpose cannot be changed. See
a description of SelecSet 400A fixed keys.

Table 1-3 SelecSet 400A Fixed Keys

Press <DSPL> to display functions of programmed keys.
Press <SWAP> to alternate between two sides of a split call
Press <JOIN> to extend (transfer) a call, and return your
phone to the idle state.
Press <CONF> to establish a conference call. Press <JOIN>,
dial a station number or outside number and press <CONF>
to establish a three-party conference. Press <CONF>, dial a
number, and press <CONF> again to establish a multiparty
conference of up to six parties.
Press <HOLD> to place an active call on hold.
Press <CNCL> during call transfer if you misdial a number.
Pressing this key disconnects the last party added to a
conference.
Press <START> to originate calls or perform call processing
features (picking up another phone).
Press <ANS> to answer all calls that ring at the attendant
position.
S
ELEC
Function
HCXTD830, Rev. A01, July 2001
S 400A U G
ET SER
Table 1-3
UIDE
for