Blocking And Sending Caller Id - Hitachi SelecSet 400A User Manual

B
LOCKING AND

Blocking and Sending Caller ID

Using ANI
block
ANI publicity
and privacy
Activating ANI
privacy (block)
on a per-call
basis
2-48
S C
ENDING ALLER
Like other internal users, you can use the ANI block
feature to allow your caller ID to be sent and displayed or
prevent your caller ID from being sent and displayed on a
per-call basis. Allowing the caller ID to be sent is referred
to as ANI publicity. Preventing, or blocking your caller ID
from being sent is known as ANI block (privacy).
Similarly, when users who call you either send or block
caller ID, your SelecSet display reflects the user's
specification for this feature.
Depending on your basic class setup, either ANI publicity
or privacy may be set for all calls that you make. Ask your
system administrator for more information on how your
basic class is set up.
If your phone is set up for ANI publicity, you can override
this setting and block your caller ID from being sent and
displayed on a per-call basis.
To activate ANI block on a per-call basis:
1
Dial the ANI privacy (block) feature access code
(typically *67).
2
Dial your desired number. Your caller ID is not sent
for this call only. For all subsequent calls, your caller
ID is sent.
ID
S S 400A U
ELEC ET
HCXTD830, Rev. A01, July 2001
G
SER UIDE