Messaging - Hitachi SelecSet 400A User Manual

C 1: A
HAPTER BOUT

Messaging

Controlling
messages with
the CLME key
Turning on the
message
waiting lamp
without calling
the station
Turning on the
message
waiting lamp
while calling
the station
HCXTD830, Rev. A01, July 2001
Y S S 400A
OUR ELEC ET
You can use the <CLME> key to control the message
waiting lamps on phones within your facility.
To turn on the message waiting lamp without calling the
station, follow these steps:
1
Press <START>. An idle CAP is selected.
2
Press the <CLME> key.
3
Dial the desired station number.
4
The display confirms that the lamp was turned on and
you hear confirmation tone (three short beeps).
1
To turn on the message waiting lamp while the phone
is ringing or busy, follow these steps:
2
Press <START>.
3
Dial the desired station number.
4
Press <CLME>. The display confirms that the lamp is
on and you hear confirmation tone (three short beeps).
M
ESSAGING
1-45