Night Service - Hitachi SelecSet 400A User Manual

N S
IGHT ERVICE

Night Service

Using the
<NIGHT> key
Multiple
attendants
Procedure
2-64
You can use the <NIGHT> key to activate night service.
Night service directs all after-hours calls to an alternate
destination (night bell, specified station, etc).
If your facility has multiple attendants, one attendant can
be designated as the pilot station for the night service
change. When the pilot station switches to night service,
all other attendants are switched as well. See your system
administrator if you need more information about your
company's night service policy.
To activate night service:
1
Press <NIGHT>. The NIGHT lamp lights.
2
All incoming calls are directed to the predetermined
location.
To deactivate night service
1
Press <NIGHT> again. The <NIGHT> lamp goes
dark.
2
Normal call routing resumes.
S S 400A U
ELEC ET
HCXTD830, Rev. A01, July 2001
G
SER UIDE