Camping-On To A Busy Station - Hitachi SelecSet 400A User Manual

C -
AMPING ON TO A

Camping-on to a Busy Station

Using the
<CAMP> key
Procedure
1 I n c S t a
2 B u s y 2 0 0
1 I n c S t a
2 C a mp O n
2-52
B S
USY TATION
To camp-on a caller to a busy analog station, use the
<CAMP> key. When you camp-on a caller, the called
station hears a tone, signaling that a call is waiting.
To camp on to a busy station:
1
After answering the call and dialing the station, you
hear busy tone. Your LCD confirms that the station is
busy. You see this display:
3 0 0 MA R T I N R Y A N
S I K E S T OM
• 300 is the calling station; 200 is the called station (the
one that will be camped-on).
2
Press the <CAMP> key. Busy tone changes to special
ringback tone (similar to normal ringing, but the tone
level drops at the end of each ring), and the display
changes to confirm the call is being camped-on.
3 0 0 MA R T I N R Y A N
2 0 0 S I K E S
3
Press <JOIN> to complete the camp-on.
When a station user receives a tone indicating that a
call is camped-on, he normally hangs up and the
camped-on call rings his station. However, another
type of call waiting allows the user to retrieve a
camped-on call by pressing then quickly releasing the
switch hook (the small plastic piece you hold down
when you want to disconnect your phone). For more
information, see your system administrator.
S
T OM
HCXTD830, Rev. A01, July 2001
S 400A U
ELEC ET SER
A v a i l a b l e
A v a i l a b l e
G
UIDE