Status Printout - Kyocera FS-6700 User Manual

2.2. Operating Procedures

Status Printout

2-16
Press the CANCEL key again if you wish to stop the cancellation of printing.
Press the ON LINE key to put the printer back online to continue with other print jobs.
Notes
Canceling data from the computer using the CANCEL key will restore temporary settings to
their default values. (The same status resulting from executing the PRESCRIBE IIe RES
command.)
It is impossible to cancel printing of just one side when printing in duplex mode using an
optional duplex printing unit (DU-25).
It is possible to print out and check the printer's current status including unit emulation, font, and
memory usage.
1. Check that the ON LINE indicator lit and that the message Ready is displayed in the message
display.
2. Press the STATUS key. The message display will read Processing, and a status page will be
printed. After it is finished printing, the message display will return to Ready.
An example of a printed status page is shown on the next page. Note that information on an
actual status page may differ slightly from this example.