System Board - HP EliteBook 2570p Maintenance And Service Manual

System board

NOTE: The system board spare part kit includes replacement thermal material.
Description
For use only on computer models equipped with the Windows 8 Professional operating system in
all countries and regions except the People's Republic of China and the Ukraine
For use only on computer models equipped with the Windows 8 Standard operating system in all
countries and regions except the People's Republic of China and the Ukraine
For use only on computer models equipped with the Windows 7 operating system in all countries
and regions except the People's Republic of China and the Ukraine
For use only on computer models equipped with the Windows 7 operating system in the People's
Republic of China and the Ukraine
Before removing the system board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Service cover (see
b. Bluetooth module (see
c. Speaker assembly (see
d. Optical drive (see
e. Hard drive (see
f. Fan (see
g. WWAN module (see
h. Modem module (see
i.
Keyboard (see
j. Base enclosure (see
NOTE: When replacing the system board, be sure that the following components are removed from
the defective system board and installed on the replacement system board:
●
SIM (see
●
Memory module (see
Battery on page
Service cover on page
Bluetooth module on page
Speaker assembly on page
Optical drive on page
Hard drive on page
Fan on page 60)
WWAN module on page
Modem module on page
Keyboard on page
Base enclosure on page
SIM on page 51)
Memory module on page
50), and then remove the following components:
52)
54)
56)
57)
58)
61)
68)
69)
74)
53)
Component replacement procedures
Spare part number
685404-601
685404-501
685404-001
692857-001
79