Remove Everything And Reinstall Sled - HP EliteBook 2570p Maintenance And Service Manual

7. Once the USB Recovery Disk On Key has booted, a dialog box will prompt, "Do you want to start
the System-Restore?" If data on the computer has not been backed up, use the tab key and select
No. The system will reboot. Back up the system data and repeat the previous steps. If no data
should be saved from the computer, use the
recovery process.
8. After the files are copied to the system, follow the on-screen instructions.

Remove everything and reinstall SLED

Sometimes you want to perform detailed reformatting of your computer, or you want to remove
personal information before you give away or recycle your computer. The process described in this
section provides a speedy, simple way to return the computer to its original state. This option removes
all personal data, applications, and settings from your computer, and reinstalls the Linux operating
system.
IMPORTANT:
back up any personal information you wish to retain.
You can initiate this option by using the
To use the
Press f11 while the computer boots.
– or –
Press and hold
The following options are available:
●
Cancel/Reboot—Reboots the system. No recovery or restore activity is performed.
●
Recover/Repair System—This option repairs a system that is not working properly and preserves
user data.
●
Restore Factory System—This option restores the system back to the original factory state. User
data is not preserved.
Select an option and follow the on-screen instructions.
134 Chapter 7 Backup and recovery
This option does not provide backups of your information. Before using this option,
f11 key:
f11 as you press the power button.
tab key to select Yes. Press
f11 key.
enter to begin the