Fan - HP EliteBook 2570p Maintenance And Service Manual
Notebook pc
Hide thumbs
Also See for EliteBook 2570p:
- Technical white paper (8 pages) ,
- Specification (36 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
Reverse this procedure to reassemble and install the hard drive.
Fan
Description
Fan (includes cable)
Before removing the fan, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
5.
Remove the service cover (see
Remove the fan:
1.
Disconnect the fan cable (1) from the system board.
2.
Loosen the two captive screws (2) that secure the fan to the top cover.
60
Chapter 4 Removal and replacement procedures
Battery on page
50).
Service cover on page
Spare part number
651378-001
52).
Hide quick links:
Advertisement
Table of Contents
