Function Button Board - HP EliteBook 2570p Maintenance And Service Manual

3. Swing the display hinges (2) up and back until the top cover is free for removal.
4. Slide the top cover forward (3).
5. Remove the top cover (4).
Reverse this procedure to install the top cover.

Function button board

Description
Function button board (includes cable)
Before removing the function button board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Service cover (see
b. Bluetooth module (see
c. Speaker assembly (see
Battery on page 50), and then remove the following components:
Service cover on page
Bluetooth module on page
Speaker assembly on page
52)
54)
56)
Component replacement procedures
Spare part number
685409-001
89