System Board - HP 245 G6 Maintenance And Service Manual

System board

NOTE: The system board spare part kit includes replacement thermal materials.
Description
System board (includes replacement thermal materials):
All system boards use the following part numbers:
xxxxxx-001: Non-Windows operating systems
xxxxxx-601: Windows 10 operating system
AMD A9-9420P processor
AMD A6-9220P processor
AMD E2-9000e processor
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
7. Remove the WLAN module (see
8. Remove the memory module (see
To remove the system board:
1. Position the computer upright, and then disconnect the following cables from the system board:
(1): USB board cable
(2): Display cable
(3): Power connector cable
(4): Power button board cable
(5): TouchPad cable
(6): TouchPad button board cable
(7): Keyboard cable
Battery on page 28).
Optical drive on page
Bottom cover on page
WLAN module on page
Memory module on page
29), if installed.
35).
37).
39).
Component replacement procedures
Spare part number
925544-xx1
925543-xx1
925545-xx1
53