Hard Drive - HP EliteBook 2570p Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kit does not include the hard drive bracket or screws.
Description
750-GB, 7200-rpm, 9.5-mm
500-GB, 7200-rpm, 9.5-mm SED
500-GB, 7200-rpm, 9.5-mm
320-GB, 7200-rpm, 9.5-mm
Hard Drive Hardware Kit (includes hard drive bracket, hard drive connector adapter, and screws)
Before removing the hard drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
5. Remove the service cover (see
Remove the hard drive:
1. Loosen the four captive Phillips screws (1) that secure the hard drive to the computer.
2. Use the hard drive tab (2) to slide the hard drive toward the front of the computer and disconnect
it from the system board.
58 Chapter 4 Removal and replacement procedures
Battery on page 50).
Service cover on page
Spare part number
633252-001
683801-001
634925-001
634862-001
651380-001
52).