HP EliteBook 2570p Maintenance And Service Manual page 98

d. Optical drive (see
e. Hard drive (see
f. Fan (see
g. WWAN module (see
h. Modem module (see
i. Keyboard (see
j. Base enclosure (see
k. System board (see
l. Top cover (see
Remove the function button board:
1. Position the top cover with the top edge toward you.
2.
Press down on the bottom edge (1) of the retention bracket, and then slide the top edge of the
bracket (2) out of the top cover.
NOTE:
3. Remove the Phillips PM2.0×3.6 screw (3) that secures the function button board to the top cover.
4. Remove the function button board (4) and cable.
Reverse this procedure to install the function button board.
90 Chapter 4 Removal and replacement procedures
Optical drive on page
Hard drive on page
Fan on page 60)
WWAN module on page
Modem module on page
Keyboard on page
Base enclosure on page
System board on page
Top cover on page
The retention bracket is included in the Bracket Kit, spare part number 651381-001.
57)
58)
61)
68)
69)
74)
79)
87)