Table of Contents
Advertisement
Hard drive
Table 5-5
Hard drive and Hard Drive Hardware Kit descriptions and part numbers
Description
Hard drive, 1 TB, 5400 rpm, 7 mm
Hard drive, 500 GB, 7200 rpm, 7 mm
Hard Drive Hardware Kit (includes hard drive cover and connector)
Hard drive cover
Before removing the hard drive, follow these steps:
1.
Prepare the computer for disassembly
2.
Place the computer in Battery Safe mode
3.
Remove the bottom cover
4.
Remove the battery
Remove the hard drive:
1.
Release the ZIF connector (1), and then disconnect the hard drive cable from the system board (2).
2.
Remove the two Phillips M2.0 × 4.0 screws (3) that secure the hard drive to the computer.
3.
Use the tab to lift the hard drive from the bay (4).
(Preparation for disassembly on page
(Battery Safe mode on page
(Bottom cover on page
(Battery on page
40).
31).
32).
Component replacement procedures
Spare part number
L30422-001
703267-001
L44510-001
L45781-001
31).
37
Advertisement
Table of Contents
