5
2
1
1
7
KD 702_1003_1404 Workshop Manual_cod. ED0053029340_1° ed_
6
2
2
2
Disassembly / Reassembly
Air filter support
The support for air filter 1 incorporates the intake manifold and
the accelerator control box.
Remove all bolts that secure the air filter support 1 to the
cylinder head. Carefully pull the air filter support from the
cylinder head. Using suitable pliers, release the governor spring
2 from the air filter support assembly.
Replace the gasket 3.
Intake manifold – Remote air filter
Unscrew the the fastening screws 1 that fix the intake duct to
the intake manifold unit.
Unscrew the two fastening screws 2 of the intake manifold from
the engine crankcase.
Lift the intake manifold and disengage the hook of the min/max
cylinder from the same manifold (fig. 212).
6
- 39 -