Lubrification Circuit - Kohler KDW 702 Workshop Manual

Water-cooled, indirect injection
Hide thumbs Also See for KDW 702:
Table of Contents

Advertisement

8

LUBRIFICATION CIRCUIT

Danger – Attention
- The engine can be damaged if allowed to operate with insufficient oil. It is also dangerous to add too much oil because
its combustion may lead to a sharp increase in the rotation speed.
- Use suitable oil in order to protect the engine.
Nothing more than lubrication oil can influence the performances and life of an engine.
- Use of an inferior quality oil or failure to regularly change the oil will increase the risk of piston seizure, will cause the
piston rings to jam and will lead to rapid wear on the cylinder liner, the bearings and all other moving parts. Engine life
will also be notably reduced.
- The oil viscosity must suit the ambient temperature in which the engine operates.
Danger – Attention
- Old engine oil can cause skin cancer if repeatedly left in contact with the skin and for long periods of time.
Wear protective gloves to avoid touching used oil.
- If contact with the oil is unavoidable, you are advised to wash your hands with soap and water as soon as possible.
Dispose of old oil in the correct way as it is highly polluting.
151
Components:
1 Pressure gauge
2 Rocker shaft
3 Connecting rod pin
4 Oil filter cartridge
5 Journal
6 Oil drain plug
7 Oil dipstick
8 Bleed
- 78 -
LUBRIFICATION CIRCUIT
9 Oil filler cap
10 Camshaft
11 Oil pressure regulating valve
12 Oil pump
13 Crankshaft
14 Oil suction filter
KD 702_1003_1404 Workshop Manual_cod. ED0053029340_1° ed_ rev. 00

Advertisement

Table of Contents
loading

Table of Contents