Store Mode; Platen Store Mode - Oce 3275 User Manual

Basic Operations

Store Mode

Store mode allows you to scan multiple originals by touching the
Basic Screen after setting copying conditions, and then outputting the complete set by
pressing [ ].
START
Platen store mode: scan originals from the platen glass.
RADF store mode: scan originals from the RADF.

Platen Store Mode

Use Platen store mode for originals that cannot be fed through the document feeder due
to thickness, size or condition.
When scanning thick originals that require keeping the document cover open, select
Non-image area erase to prevent exposure of the glass area around the border of the
original. This feature ensures a clean copy result and reduces toner consumption. The
Non-image area erase mode automatically releases after the original for which it is
selected is scanned. Additional images may be scanned.
Incompatible Basic Copying Conditions: None
Incompatible Special Originals: None
Incompatible Applications: Storing Image in Overlay Memory
Basic Screen
1 Open the document feeder.
2 Place original FACE DOWN on the platen glass, then close the document feeder.
IMPORTANT: PLACE AND SCAN THE ORIGINALS IN REGULAR ORDER OF PAGINATION.
3 Make the desired copying selections, and select 1-1 or 1-2 copy mode.
4 Touch on the Basic Screen to highlight it.
STORE
5 Press [ ] to scan the original.
START
6 Repeat steps 1, 2 and 5 until all originals are scanned.
7 Touch to exit the Store mode.
STORE
key on the
STORE
Basic Operations 6-27