User Density Level 2 Setting [2] - Oce 3275 User Manual

Key Operator Mode
User Setting Mode [3] (continued)

User Density Level 2 Setting [2]

Output copying samples from 16 density levels from Lighter to Normal or Normal to
Darker, then select the desired exposure and program it as USER 2.
The programmed copy density can be recalled by selecting USER 2 on the Basic
Screen.
User Setting Mode Menu Screen
1 Press [ ] to display the Help Screen, then touch
HELP
Enter a 4-digit key operator password, then touch
Mode Screen.
NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 Touch
[3] User setting mode
touch
[2] User density level 2 setting
Screen.
3 Place the original on the platen glass or in the RADF.
4 Touch or
Darker Lighter
5 Touch ,
No.1 1~4 No.2 5~8
[ ]. The density level sample sheet will be output.
START
6 Select the desired exposure from the sample sheet(s), then enter the density level
No. by using the touch screen keypad.
7 Touch to complete the setting and return to the User Setting Mode Menu Screen.
OK
8 If no further changes are required, proceed to step 10.
9 If other user setting changes are required, touch the key.
10 Touch
PREVIOUS SCREEN
11 Touch
PREVIOUS SCREEN
User Density Level 2 Setting Screen
to display the User Setting Mode Menu Screen, then
to display the User Density Level 2 Setting
to select the density level to be programmed.
, ,
No.3 9~12 No.4 13~16
to restore the Key Operator Mode Screen.
to restore the Basic Screen to perform copying operations.
Key Operator Mode
to display the Key Operator
OK
, or , then press
Set density ##
Key Operator Mode 14-13
.