All Count Reset [2] - Oce 3275 User Manual

Key Operator Mode
ECM (Electronic Copy Monitor) Function Setting [4] (continued)
E.C.M. All Count Reset [2]
Reset the count for all ECM accounts.
ECM Setting Menu Screen
1 Press [ ] to display the Help Screen, then touch
HELP
Enter a 4-digit key operator password, then touch
Mode Screen. (See note 1.)
2 Touch
[4] E.C.M. function setting
code is required.
3 Enter your 8-digit ECM master key code, then touch
Menu Screen. (See note 2.)
4 Touch
[2] E.C.M. all count reset
5 Touch to reset all counters to zero and to return to the ECM Setting Menu
YES
Screen.
Or, touch to cancel. Touching
NO
and return to the ECM Setting Menu Screen.
6 If other ECM setting changes are required, touch the desired key, from [1]~[3].
7 Touch
PREVIOUS SCREEN
operator setting changes are required, select the desired menu item, from [1] to [18].
8 If no further changes are required, touch
Screen to perform copying operations.
NOTES:
1 If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 If an invalid ECM master key code is entered, continue by entering the valid 8-digit code.
ECM All Count Reset Screen
. The ECM Master Key Code Screen displays, if a
. The ECM All Count Reset Screen will be displayed.
PREVIOUS SCREEN
to restore the Key Operator Mode Screen. If other key
PREVIOUS SCREEN
.
Key Operator Mode
to display the Key Operator
OK
to display the ECM Setting
OK
will also cancel this function
to restore the Basic
Key Operator Mode 14-21