Basic Operations
Copy Mode (continued)
Copy Mode Using RADF
Before selecting the Copy Mode shown on the screen below, read specifications on the
previous page and see Section 4 for information on positioning originals.
Basic Screen (with 1s2 mode selected)
1 Touch the desired mode key
A copy mode key will appear dimmed if it is incompatible with other selections made.
2 Position originals FACE UP in the document feeder, as required.
3 When all settings are acceptable, press [
To cancel the mode, touch the desired Copy Mode key on the Basic Screen.
NOTE: When the finisher/ trimmer unit/ paper exit tray capacity is exceeded due to the print quantity
selected, remove the copied sets while the paper is exiting; otherwise, mishandled paper will occur.
:
on the Basic Screen
1s s s s s 1
].
START
,
,
, or
.
1s s s s s 2
2s s s s s 1
2s s s s s 2
Basic Operations 6-5