Memory Overflow - Oce 3275 User Manual

Troubleshooting

Memory Overflow

In certain modes, the Océ 3275 uses memory for convenience and to make operations
flow smoothly. Occasional memory overflow may occur if the installed memory is
inadequate for the copy conditions selected. Should memory overflow occur frequently, it
is recommended that you contact your Océ service representative to extend the memory
capacity in your machine.
When memory overflow occurs, the following screen will be displayed to enable you to
take an appropriate measure for the current job situation.
Memory Overflow Management Screen
When memory overflow occurs while scanning the first job, the machine stops
immediately, and the screen provides
available options.
NOTE: If the job settings include Booklet mode, SCAN STOP will disappear.
• To delete all the scanned data and discontinue the job, touch
• To give up further scanning but print out all the data already scanned into memory,
touch .
SCAN STOP
When memory overflow occurs during the reserve operation,
the active screen. In this case, the machine will not stop until all the jobs on standby for
printing are completed.
• To delete the scanned data and discontinue the last reserve job, touch
• To give up further scanning but print out the data already scanned for the last reserve
job, touch
SCAN STOP
NOTE: If the job settings include Booklet mode, SCAN STOP will disappear.
• To continue scanning the last reserve job, touch
gradually enables memory for new data.
16-4 Troubleshooting
JOB STOP
.
and as the only two
SCAN STOP
JOB STOP
CONTINUE
as the current printing job
CONTINUE
.
also appears on
.
JOB STOP