Booklet; Chapter ....................................................................................................................... 13-4 Combination - Oce 3275 User Manual

Shortcuts
Chapter
(p. 9-8)
1 Touch to display the Application selection screen.
APPLI.
2 Touch to display the Chapter page setting screen with 1-2 mode
Chapter
automatically selected.
3 Use the keypad to enter the page number of the first title page, then touch
4 Repeat Step 3 for each additional title page, touching
5 Touch to return to the Application selection screen.
OK
6 Make additional copying selections.
7 Touch to return to the Basic screen.
OK
8 Enter the print quantity amount.
9 Position (up to 100) originals face up on the RADF (document feeder) tray.
10 Press [ START ]. When copying is completed, press [ AUTO RESET ] to reset the machine.
Combination: Copy 2, 4 or 8 originals on 1 sheet
1 Touch to display the Application selection screen.
APPLI.
2 Touch
Combination
3 Touch ,
2 in 1 4 in 1
4 Touch to return to the Application selection screen.
OK
5 Make additional copying selections.
6 Touch to return to the Basic screen with AMS automatically selected. You may
OK
change this setting.
7 When all settings are correct, enter the print quantity amount.
8 Place original(s) face up on the RADF (document feeder) tray.
9 Press [ START ]. When copying is completed, press [ AUTO RESET ] to reset the machine.

Booklet

(p. 9-12)
1 First, load 11"x17" or 8.5"x11"R paper in a tray.
2 Touch to display the Application selection screen.
APPLI.
3 Touch to display the Booklet mode selection screen.
Booklet
4 Touch
NO COVER SHEET
5 Select the cover sheet tray source and the binding mode, if required.
6 Touch to return to the Application selection screen.
OK
7 Make additional copying selections, or touch
8 Select 1-2 or 2-2 copy mode. To release AMS default, select magnification and copy
size.
9 Touch
OUTPUT APPLI.
installed, or to select trimming if the Trimmer unit is installed.
10 Touch to restore the Basic screen, then enter the print quantity amount.
OK
11 Position letter-size originals face up on the RADF (document feeder) tray, in portrait
orientation.
12 Press [ START ]. When copying is completed, press [ AUTO RESET ] to reset the machine.
13-4 Shortcuts
to display the Combination mode selection screen.
, or .
8 in 1
,
COVER WITH COPY SHEET
to select folding or stapling & folding if the Finisher-Binder is
after each entry.
SET
(p. 9-10)
, or
COVER WITH BLANK SHEET
to return to the Basic screen.
OK
.
SET
.