Radf Store Mode - Oce 3275 User Manual

Basic Operations
Store Mode (continued)

RADF Store Mode

Use this feature to scan more than 100 original into memory from the RADF. Use this
function in conjunction with the Reserve function to increase efficiency of the copying
job.
Incompatible Basic Copying Conditions: None
Incompatible Special Originals: Resolution (Very high)
Incompatible Applications: Image insert, Book copy, Storing Image in Overlay Memory
Basic Screen
1 Touch on the Basic Screen to highlight it.
STORE
2 Make the desired copying selections.
3 Position originals FACE UP on RADF.
If the number of originals exceeds 100, divide them into blocks not exceeding 100
sheets and load them from the block with the first page.
4 Enter the print quantity, using the keypad. The entered quantity will be displayed on
the upper right message area of the Basic Screen.
To change the print quantity, press [
5 Press [ ] to scan the originals.
START
6 Repeat steps 3 and 5 until all originals are scanned.
To delete the scanned data without printing, press [
popup menu to ensure that you delete the data.
7 Touch to exit the Store mode.
STORE
8 Press [ ]. The copier starts the printing job.
START
] and re-enter the correct quantity.
C (CLEAR QTY.)
], then touch
STOP
on the
CANCEL
Basic Operations 6-29