Interrupt Mode - Oce 3275 User Manual

Basic Operations

Interrupt Mode

Use the Interrupt mode to interrupt copying in progress to perform a simple job. When
interrupt copying is completed, the settings for the initial job restore automatically and
the Basic Screen displays. Press the [
following conditions:
• Printing continuously the image stored using Store mode
• Scanning the originals using Store mode
• Scanning the originals using Store mode while printing in Reserve mode
If desired, key operator can change the timing to stop current machine operation for
interrupt copying. Note that the compatible copying conditions vary according to the
timing selected. See p. 14-40 ~ p. 14-45.
Incompatible Basic Copying Conditions: Reserve
Incompatible Special Originals: None
Incompatible Applications: Storing Image in Overlay Memory
Control Panel
INTERRUPT
PROOF COPY
STOP
START
1 To stop the current copying job, press [
copying will cease only after certain phases of the immediate operation are completed,
as indicated by LED conditions described below.
• Collectively printing image stored in memory
The [ ] LED blinks until one set of the current job is printed. Then the LED
INTERRUPT
remains steady for the temporary job performed in Interrupt mode.
• Scanning originals into memory
The [ ] LED blinks until scanning is completed for all originals placed in
INTERRUPT
the document feeder. Then, the LED remains steady for the temporary job
performed in Interrupt mode.
• Scanning originals into memory while printing in Reserve mode (see Note 1)
The [ ] LED blinks until the copier completes the current printing job, scans
INTERRUPT
all originals placed on the document feeder, and prints one set of the Reserved job.
The LED remains steady for the temporary job performed in Interrupt mode.
All indicators on the Basic Screen will change to
JOB
INTERRUPT
Basic Screen
INTERRUPT
] key when the copier is in the
]. For particular jobs in progress,
.
INTERRUPT
Basic Operations 6-37