Auto Layout; All-Image Area; Image Shift/ Reduce & Shift - Oce 3275 User Manual

Shortcuts

AUTO Layout

(p. 9-31)
1 Touch to display the Application selection screen.
APPLI.
2 Touch
AUTO Layout
3 Make additional copying selections, or touch
4 Select copy size and enter the print quantity amount.
5 Position original face up in the document feeder or face down on the platen glass
without skewing it. When using platen glass, DO NOT CLOSE the document cover.
6 Press [ START ]. When copying is completed, press [ AUTO RESET ] to reset the machine.

All-Image Area

(p. 9-33)
1 Touch to display the Application selection screen.
APPLI.
2 Touch
All-image Area
paper.
3 Make additional copying selections, or touch
4 Select copy size and enter the print quantity amount.
5 Position original(s) face up on the document feeder tray or face down on the platen
glass.
6 Press [ START ]. When copying is completed, press [ AUTO RESET ] to reset the machine.
Image Shift/ Reduce & Shift
1 First, select a copy mode (1-1, 1-2, 2-1, 2-2) and a copy size from the Basic screen.
2 Touch to display the Application selection screen.
APPLI.
3 Touch
Image Shift
4 Touch
Image Shift
5 Touch ,
FRONT BACK
shift to occur.
When Booklet or 2 Repeat mode of Repeat has been selected, the PAGE SPACE
setting is available.
6 Touch ,
UP SHIFT DOWN SHIFT
direction.
7 Use the touch screen keypad to enter the shift amount , from 0 ~ 250 mm.
8 Touch to return to the Application selection screen.
OK
9 Make additional copying selections, or touch
10 Enter the print quantity amount.
11 Position original(s) face up on the document feeder tray or face down on the platen
glass.
12 Press [ START ]. When copying is completed, press [ AUTO RESET ] to reset the machine.
13-8 Shortcuts
to center the original image on the copy paper.
if you wish to copy the image completely to the edges of the
(p. 9-34)
to display the Image shift selection screen.
(or , if image loss is likely).
Reduce & Shift
, or to indicate the side(s) on which you want the
BOTH SIDES
,
RIGHT SHIFT
to return to the Basic screen.
OK
to return to the Basic screen.
OK
, or to specify the shift
LEFT SHIFT
to return to the Basic screen.
OK