Auto Layout - Oce 3275 User Manual

Applications

AUTO Layout

Use this function to detect the image area of the original and center the whole image on
the copy paper.
Copy mode is automatically set to 1-1; 1-2 mode is also available only when using Store
mode.
APS and AMS are automatically released. Changing Magnification is available.
Non-image area erase is automatically selected. (Release it manually when using RADF to
scan originals.)
Original/Copy size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"
Incompatible Basic Copying Conditions: APS, AMS, Rotation Sort, Rotation Group, Folding or
Stapling & Folding with Booklet
Incompatible Special Originals: Mixed Original, Z-folded Original, SDF
Incompatible Applications: Sheet/Cover Insertion, Combination, Booklet, Image Insert, Reverse
Image, Repeat, All-Image Area, Image Shift, Overlay, Storing image in Overlay Memory
NOTE: The AUTO layout function may not operate properly if the lighting in the work place is directly over the
platen glass. In this case, consult your service representative about an appropriate place for installation.
Application Selection Screen
Set original
Face Down
AUTO layout copying
Applications 9-31