Sort Mode Using Primary (Main) Tray - Oce 3275 User Manual

Output Modes

Sort Mode Using Primary (Main) Tray

Use this mode when you want to output multiple copies of the original set, and have
each sorted set offset upon exit. The staple mode can be selected with the sort mode.
With the Primary (main) tray initially selected on the Finisher Mode Selection Screen,
Finisher / Finisher-Binder outputs the printed sheets FACE DOWN in the proper order.
Paper size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"
(5.5"x8.5" paper is available in landscape type feeding (
Paper capacity for 20 lb: 500 sheets 5.5"x8.5"
Basic Screen
1 Touch on the Basic Screen to highlight it.
SORT
2 Enter the desired print quantity.
3 Position originals in the document feeder, and make copying selections as required.
When using Store mode, see p. 6-27 to p. 6-29.
4 Press [ ].
START
CAUTION:
When the finisher capacity is exceeded due to the print quantity selected, remove the copied sets while
the paper is exiting; otherwise mishandled paper will occur.
7-6 Output Modes
3,000 sheets 8.5"x11", 8.5"x11"R
1,500 sheets 11"x17", 8.5"x14"
2
1
2
1
) only)
3
3
30mm