Timer Setting [2] - Oce 3275 User Manual

Key Operator Mode
Weekly Timer [9] (continued)

Timer Setting [2]

Use this function to set the On/Off times in hours and minutes for each day of the week
or set the collective time for the entire week, i.e., the same On/Off time for each day.
Weekly Timer Setting Menu Screen
1 Press [ ] to display the Help Screen, then touch
HELP
Enter a 4-digit key operator password, then touch
Mode Screen. (See note 1.)
2 Touch
[9] Weekly timer
to display the Weekly Timer Setting Menu Screen. (See note 2.)
OK
NOTES:
1 If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 If an invalid Weekly timer master key code is entered, continue by entering the valid 4-digit code.
3 Touch [2] Timer setting to display the Weekly Timer On/Off Time Setting Screen.
4 When the screen is displayed, the ON-time of Monday is always highlighted.
Enter a 2-digit ON-hour (ex. 8 a.m. is 08) and a 2-digit ON-minute (ex. 7 min. is 07)
using the touch screen keypad, and then touch
Touching repeatedly will shift the input section from Monday ON, Monday OFF,
SET
Tuesday ON, Tuesday OFF e.g.
NOTES:
• If ON-time and OFF-time are the same, power will not go on.
• If the setting is 00:00~00:00, you will not be able to set the copiers off/on condition for specific days.
When setting Sunday OFF-time, Monday ON-time is highlighted again. Proceed to
step 6.
Weekly Timer On/Off Time Setting Screen
Weekly Timer On/Off Time Collective Setting Screen
. Enter your 4-digit Weekly timer master key code, then touch
Key Operator Mode
to display the Key Operator
OK
.
SET
Key Operator Mode 14-31
.