Tray Size Setting [11] - Oce 3275 User Manual

Key Operator Mode

Tray Size Setting [11]

Select whether the tray size setting will be detected or not detected when ATS/APS
functions. If you select it to be detected, you may also select the priority of the detection
for each tray.
Key Operator Mode Screen 1
1 Press [ ] to display the Help Screen, then touch
HELP
Enter a 4-digit key operator password, then touch
Mode Screen. (See note.)
2 To display menus [11] to [18] of the Key Operator Mode Screen, touch
arrow key.
3 Touch
[11] Tray size setting
4 On the left half of the screen, touch to highlight each tray key, then select
to specify whether the selected tray is to be automatically detected or not when ATS/
APS functions.
5 Tray keys specified as ATS/APS ON will appear on the right half of the screen.
Touch to highlight the desired tray key, then change its priority by using
( ) arrow keys.
Down
6 Touch to complete the setting and restore the Key Operator Mode Screen.
OK
7 If other key operator setting changes are required, select the desired menu item, from
[1] to [18].
8 If no further changes are required, touch
Screen to perform copying operations.
NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
14-38 Key Operator Mode
Key Operator Mode Screen 2
Tray Auto Select Setting Screen
to display the Tray Auto Select Setting Screen.
PREVIOUS SCREEN
.
Key Operator Mode
to display the Key Operator
OK
to restore the Basic
Lower
or
OFF ON
( ) and
Up