Special Dialling; Entering Pauses In A Fax/Telephone Number - Canon FAX-L280 User Manual

Special Dialling

Entering Pauses in a Fax/Telephone Number

You may need to enter pauses in a fax/telephone number in the following
situations:
When you dial or register an overseas number. The length and position of the
pause depends on the telephone system of your country.
When your FAX is connected to a switchboard. For details, see p. 3-9.
Follow this procedure to enter pauses during regular dialling or when
registering a number for speed dialling:
1
When you come to the step that
requires you to enter the
fax/telephone number, use the
numeric buttons to enter the number
up to where a pause is necessary.
2
Press Redial/Pause to enter a
pause.
3
Continue entering the rest of the
fax/ telephone number with the
numeric buttons.
4
To enter a pause at the end of the
number, press Redial/Pause.
5
Continue with the operation you are
performing.
* Four seconds in the UK and Hong Kong.
9-2
Special Features
If you enter the wrong number, press
Clear, then enter the correct number.
A pause entered within a number (p)
is two seconds* long.
For a longer pause, press
Redial/Pause again for another
two-second* pause. Alternatively,
you can change the length of the
pause (
MID PAUSE SET,
p. 14-6).
If you enter the wrong number, press
Clear and start again from step 1.
A pause at the end of a number (P)
is fixed to ten seconds.
Ex:
TEL=
Ex:
TEL=
Ex:
TEL= 00p811234
Ex:
TEL= 00p811234P
Chapter 9
00
00P